IT certification exam dumps

Exam Number/Code: 920-464
Exam Name: Nortel Converged Campus ERS Rls.4.x/5.xAdvanced Config&Maint
Questions and Answers: 60 Q&A

certinside offers free pdf exam for Nortel Other Nortel Certification
920-464 (Nortel Converged Campus ERS Rls.4.x/5.xAdvanced Config&Maint). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products. certinside’s 920-464 study guide will help you pass your 920-464 test.

Why choose certinside 920-464 Exam
Quality and Value for the 920-464 Exam
100% Guarantee to Pass Your 920-464 Exam
Downloadable, Interactive 920-464 Testing engines
Verified Answers Researched by Industry Experts
Drag and Drop questions as experienced in the Actual Exams
Practice Test Questions accompanied by exhibits
Our Practice Test Questions are backed by our 100% MONEY BACK GUARANTEE.

certinside Exam Help you pass 920-464 Exam and obtain the Nortel
Other Nortel Certification
Certification.

Nortel 920-464 Downloadable, Interactive Testing engines

We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our Nortel 920-464 Exam will provide you with free 920-464 dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the 920-464 Exam:100% Guarantee to Pass Your Other Nortel Certification
exam and get your Other Nortel Certification
certification.

Free study guide
　
　
Exam : Nortel 920-464
Title : BCM50 Rls.3.0 BCM200/400 Rls 4.0&BCM450 Rls. 1.0 Instal Con

1. Click on the Exhibit button.
The Ethernet Routing Switch (ERS) 8600 switch includes a means to fine tune the memory resources by allowing you to change the record allocations. You need to configure an ERS 8600 running Rls. 5.0 to be optimized for Multicast traffic. Refer to the exhibit to view the allocation description.
Which command alters the ERS 8600 to increase the default allocation of Multicast 50%?
A.config sys set multicast-resource-reservation 3073
B.config sys set record reserve MGID + 50%
C.config sys set max-vlan-resource-reservation 4096
D.config sys set show sys mgid usage
Answer:A

2. An Ethernet Routing Switch (ERS) 8600 is being provisioned for MPLS as a Provider Edge (PE) device. OSPF is being used within the campus LAN.
Which parameter must be configured to identify the ERS 8600 when using OSPF and MPLS?
A.An out-of-band management interface must be identified.
B.A PE address must be configured for device identification.
C.A circuitless IP address must be configured as the Router ID for OSPF and MPLS.
D.The MPLS router ID must be the same as an IP interface address in the OSPF Backbone Area.
Answer:C

3. A client needs to configure Internet Protocol Flow Information eXport (IPFix) to export flow information on their Ethernet Routing Switch (ERS) 5530 switch as part of their security solution.
Which step must be performed first?
A.Each interface must be configured with the IP address of the security server which will receive the IPFix information.
B.An Advanced License must be installed on each of the ERS 5530 switches that will be exporting flow information.
C.Simple Network Management Protocol (SNMP) community strings must be configured for the security server which will poll the IPFix information.
D.The switch must be configured to specify the version of NetFlow messages to export.
Answer:B

4. An enterprise network provider needs to offer a multi-tenant infrastructure and therefore implements independent networks to customers. The Ethernet Routing Switch (ERS) 8600 using Virtual Router Forwarding (VRF) was chosen. After upgrading to Rls. 5.0 and installing the Supermezz modules, it is mandatory to ensure the switch will run VRF.
What are the requirements for implementing VRF on the ERS 8600 switch?
A.software Rls. 4.1, R/RS Modules, Premier Software License
B.software Rls. 5.0, R-Mode, Premier Software License
C.software Rls. 5.0, R/RS Modules, Advanced Software License
D.software Rls. 5.0, Supermezz, R/RS Modules, Premier Software License
Answer:D

5. The upgrade of an Ethernet Routing Switch (ERS) 8300 to Rls. 4.1 was unsuccessfully installed and you must resolve the issue. The switch is out of network service. After you perform a power-on reset of the chassis it is running Rls. 4.1; however, the chassis modules have the following light indications:
Slot 1 8308XLOnline – yellow
Slot 2 8348GTX Online – yellow
Slot 5 8394Sf Master – green
Slot 6 8394SF Master – flashing green
The results of the dir command indicate that the files p83a4100.img and p83b4100.img are present on flash on both CPUs along with the older Rls. 4.0 files.
The results of the choices command indicate that the primary image file is specified as /flash/p83a4100.img and the secondary image /flash/p83a4000.img.
What is the most feasible cause of the unsuccessful upgrade?
A.The ERS 8300 p83b4100.img file should be booted.
B.You can not upgrade to Rls. 4.1 with two switch fabric modules in the chassis.
C.The primary image file /flash/p83a4100.img is wrong.
D.The I/O Module image file for Rls. 4.1 is not found on flash.
Answer:D

6. A small business has a requirement to implement a resilient local area network. The Ethernet Routing Switch (ERS) 1600 meets the customer requirements because of its ability to run Split Multilink Trunking (SMLT). One of the remaining open questions is about the Quality of Service (QoS) capabilities of the product.
Which statement reflects the QoS capabilities of the ERS 1600 switch?
A.It uses Resource Reservation Protocol RSVP.
B.It supports 802.1p and DiffServ and the ability to Police and Shape network traffic.
C.It provides simple First In First Out (FIFO) QoS.
D.It does not need QoS when operating in an SMLT configuration.
Answer:B

7. An existing enterprise network is using Ethernet Routing Switch (ERS) 8600 switches in the campus core. It has been determined that 10 Gigabit links are required to replace the existing 1 Gigabit links to the closet. This will effect 18 connections on each of the ERS 8600 switches.
What is the best way to accomplish this requirement in each ERS 8600 chassis?
A.Replace the two existing switch fabric modules with 8394SF systems.
B.Replace the two existing switch fabric modules with 8692SF and Supermezz.
C.Replace the two existing 8616SXE modules with 8612XLRS modules.
D.Replace the six 8683XLR modules with 8612XLRS.
Answer:C

8. A campus LAN core consists of two Ethernet Routing Switch (ERS) 8600 switches in a redundant configuration running Split Multilink Trunking (SMLT). Currently there is only one switch fabric 8691SF for each ERS 8600 with plans to incorporate new RS modules and enable High Availability (HA-cpu) mode.
What is required to set up the switch fabric upgrade?
A.Deploy one 8692SF module for each chassis to minimize costs and enable HA-cpu mode.
B.Deploy two 8692SF modules for a single chassis configuration and enable HA-cpu mode on that chassis eliminating the need for SMLT.
C.Deploy two 8692SF modules for each chassis, replace the 8691SFs and enable HA-cpu mode.
D.Deploy two 8692RS modules for each chassis for compatibility with RS modules and enable HA-cpu mode.
Answer:C

.