IT certification exam dumps

Exam Number/Code: 920-452
Exam Name: NCSE-Communication Server 1000 Ris.4.0
Questions and Answers: 56 Q&A

certinside offers free pdf exam for Nortel NCSE
920-452 (NCSE-Communication Server 1000 Ris.4.0). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products. certinside’s 920-452 study guide will help you pass your 920-452 test.

Why choose certinside 920-452 Exam
Quality and Value for the 920-452 Exam
100% Guarantee to Pass Your 920-452 Exam
Downloadable, Interactive 920-452 Testing engines
Verified Answers Researched by Industry Experts
Drag and Drop questions as experienced in the Actual Exams
Practice Test Questions accompanied by exhibits
Our Practice Test Questions are backed by our 100% MONEY BACK GUARANTEE.

certinside Exam Help you pass 920-452 Exam and obtain the Nortel
NCSE
Certification.

Nortel 920-452 Downloadable, Interactive Testing engines

We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our Nortel 920-452 Exam will provide you with free 920-452 dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the 920-452 Exam:100% Guarantee to Pass Your NCSE
exam and get your NCSE
certification.

Free study guide
　
　
Exam : Nortel 920-452
Title : NCDE Callpilot 2.x/3.0 Unified Messaging
Version : Demo

1. A company has a two-site Communication Server (CS) 1000 Rls. 4.0 system (site A and B) providing IP-PBX services. Both systems are networked via a managed IP backbone. One system is a CS 1000 Rls. 3.0 Main Office (MO) and the other is a Media Gateway 1000 Rls. 4.0 branch office (BO). You configure the networked systems to enable the following: ? Users at the MO to call BO workstations by dialing 49xxx. ? Users at the BO to call MO workstations by dialing 2xxx. Which initial configuration task should you perform using Element Manager (EM)?
A. Configure an LSC of 2 and a DSC of 49 in the MO.
B. Configure a DSC of 2 in the MO and configure VNR in the BO.
C. Configure a DSC of 49 in the MO and configure Vacant Number Routing (VNR) in the BO.
D. Configure a Local Steering Code (LSC) of 49 and a Distant Steering Code (DSC) of 2 in the BO.
Answer: C

2. A customer has just installed a Communication Server (CS) 1000M system. The CS 1000M is networked via the corporate WAN with several offices around the country. BARS is configured correctly for all telephones to use this route and the Virtual Trunks show IDLE. Traffic studies have shown that the majority of calls to remote locations are going out via the PSTN route instead of the virtual route. What in the configuration could cause this situation?
A. CODEC is not assigned to the Virtual Trunk Route
B. Bandwidth is incorrectly defined in the Zone Basic Property
C. CODEC not defined for the zone in the Zone Basic Property
D. Bandwidth is not defined for the Virtual Trunk Route and member trunks
Answer: B

3. A customer has installed two Communication Server (CS) 1000M Rls. 4.0 systems networked over the corporate WAN. Some of the system management functions of the CS 1000M can be performed by the Command Line Interface (CLI) as well as Element Manager. Which is a false statement regarding the use of Element Manager (EM) over the CLI?
A. EM provides for drop down menus for prompt choices.
B. EM provides full text descriptions of parameters and acronyms.
C. EM allows the programmer to use the LD commands as well as using menus.
D. EM increases speed and efficiency be organizing parameters to logical groups.
Answer: C

4. A company has a multi-site Communication Server (CS) 1000M-Chassis Rls. 4.0 system. If one of the Media Gateways goes into Survival Mode, they want Manual Control to restore the Media Gateway into Normal Mode. In Overlay LD 117, which command should you use to achieve this configuration?
A. Chg Surv <port> No
B. Chg Surv <port> Yes
C. Chg Autosb <port> No
D. Chg Autosb <port> yes
E. Chg Swoto <port> <value>
Answer: C

5. A customer is installing a Communication Server (CS) 1000M-SG Rls. 4.0 at their Main Office (MO). They have a 10-member network using the corporate WAN and a Primary Gatekeeper. They want to use an Alternate Gatekeeper for redundancy. When are the Alternate Gatekeepers programmed? (Choose two.)
A. during software installation and initial setup of the Signaling Server
B. in Overlay LD 17 (Configuration) under the ADAN as an ELAN IP address
C. in Overlay LD 117 (Configuration2) as an Embedded LAN (ELAN) IP address
D. in Element Manager under the Signaling Server setting after the software has been installed
Answer: AD

6. A customer has installed a Communication Server (CS) 1000M Rls 4.0 system. Currently all 800 IP telephones at the site are registered to a single Signaling Server . This site has three installed media cards. What component(s) should be added at the site to ensure full redundancy for IP telephones?
A. an additional Signaling Server must be installed and set as Failsafe
B. an additional Signaling Server must be installed and programmed as Follower
C. an additional Signaling Server must be installed and programmed as Alternate
D. two additional media cards to ensure that all 800 IP telephones can register to media cards if the Leader Signaling Server fails
Answer: B

7. A customer has a network that contains several Communication Server (CS) 1000 Rls 4.0 systems. They are networked together via Virtual Trunks. The customer has limited bandwidth on the WAN links between sites and has an Optimized WAN link to carry Voice calls that use G.729A. Which configuration setup will ensure that G.729 is always used on a virtual trunk call between sites?
A. No extra configuration is needed. Virtual Trunk calls always use G.729A CODEC.
B. ? configure the virtual route to be in same zone as voice gateway channels and IP sets ? verify that the customer has G.729A as part of CODEC profile ? verify all zones at the site are configured with best quality for intrazone calls and best bandwidth for interzone calls
C. ? virtual route is configured to be in different zone than the voice gateway channels and IP sets ? verify the customer has G.729A as part of CODEC profile ? ensure all zones at the site are configured with best quality for intrazone calls and best quality for interzone calls
D. ? the virtual route is configured to be in a different zone than voice gateway channels and IP Sets for each system ? verify the customer has G.729A as part of CODEC profile ? ensure all zones at the site are configured with best quality for intrazone calls and best bandwidth for interzone calls
Answer: D

8. A customer has a Communication Server (CS) 1000 Rls. 4.0 that they want to network with two other sites using the corporate WAN. Why must zones be configured with Element Manager before the Virtual Routes? (Choose two.)
A. Zones determine NCOS privileges on a given trunk.
B. Zones govern trunk groupings for TGAR assignment.
C. Zones help determine Best Bandwidth CODEC per virtual trunk call.
D. Zones manipulate CODEC selections and assigns bandwidth to a route.
E. Zones provide call blocking based on Bandwidth defined for inter- and intra-zone calls.
Answer: CE

.